Range Rover (LM) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-378002.png)
Installation
1. Install the fuel temperature sensor.
^
Clean the component mating faces.
^
Apply sealant to the sensor thread.
^
Tighten the sensor to 7 Nm (5 ft. lbs.).
^
Connect the electrical connector.
2. Connect the IAT sensor electrical connector.
3. Install the throttle body intake.
^
Align the bushing.
^
Secure the clip.
^
Connect the breather line.
4. Attach the wiring harness.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
5. Install the air intake resonator.
6. Connect the battery ground cable.
