Range Rover (LM) V8-4.2L SC (2006)
8. CAUTION: Make sure the ball joint seal is not damaged. A damaged seal will lead to the premature failure of the joint.
Release the tie rod end.
^
Loosen the nut.
^
Use the special tool.
^
Remove the nut.
9. WARNING: Use a jack to support the hub and lower arm.
Release the hub from the air suspension spring.
^
Remove the 2 nuts and 2 bolts.
^
Lower the jack.
10. Mark the fitted position of the stud to aid assembly.
^
Remove the nut.
11. CAUTION: Lower the air suspension spring sufficiently to release the air line connection.
NOTE: Models with standard brakes shown, models with high performance brakes similar.
Release the air suspension spring.
^
Remove the cap.
^
Remove the 2 remaining nuts.