Range Rover (LM) V8-4.2L SC (2006)
Position the lifting pad of the hydraulic jack under the centre of the front sub-frame, front cross member.
With the vehicle raised to the desired height, position axle stands under, either, the front sub-frame or the recommended customer jacking points.
CAUTION: Position suitable material between axle stands and component/body to prevent damage.
Carefully lower jack until vehicle rests on axle stands.
WARNING: Before commencing work on the underside of the vehicle, ensure that axle stands are correctly positioned and vehicle is securely
supported.
Reverse procedure when removing vehicle from stands.
Raising the Rear of the Vehicle
Select 'P' - PARK on automatic transmission selector.
WARNING: Always chock the front wheels when jacking the rear of the vehicle.
Position the lifting pad of the hydraulic jack under the centre of the rear sub-frame, rear cross member as shown.