Range Rover (LM) V8-4.2L SC (2006)
Seals and Gaskets: Service and Repair
Selector Shaft Seal
Selector Shaft Seal
Service Repair No - 44.15.34
Special Service Tools
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. RH side only: Release the selector cable and lever.
^
Remove the 2 bolts.
^
Remove the nut.
3. CAUTION: Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug
any open connections to prevent contamination.
Remove the selector shaft seal.
^
Install 307-509-1 to the seal.
^
Install 307-509-2 to 307-509-1 and extract the seal.