Range Rover (LM) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-1367003.png)
8. LH side front: Release the suspension height sensor.
9. Using the special tool release the LH front lower arm.
^
Remove the nut.
^
Loosen the nut and bolt.
10. Using the special tool release the LH rear lower arm.
^
Loosen the nut and bolt.
^
Remove the nut.
11. Position a container to collect the fluid spillage.
12. Install the special tool, to the inner halfshaft joint.
13. CAUTION: Keep the halfshaft horizontal to avoid damaging the seal.
