Range Rover (LM) V8-4.2L SC (2006)
14. Apply a continuous bead of sealant to windscreen as shown,
^
'A' = 8 mm (0.31 in)
^
'B' = 11 mm (0.43 in).
15. With assistance, fit and align windscreen. Lightly press windscreen to seat sealer.
16. Remove protective covers and tape.
17. Connect multiplugs to tailgate glass.
18. Test sealer for leaks, apply additional sealer if necessary. If water is used, allow sealer to dry before testing. Spray water around glass and check
for leaks. Mark any area that leaks. Dry glass and sealer then apply additional sealer.
19. Fit tailgate inner side finishers.
20. Fit tailgate trim casing.
21. Fit rear wiper arm.