Range Rover (LM) V8-4.4L (2009)
^
Release from the clips.
6. Release the rear safety belt lower anchor.
^
Remove and discard the bolt.
7. Remove the C-pillar upper trim panel.
^
Reposition the rear safety belt through the C-pillar upper trim panel.
Installation
1. Install the C-pillar upper trim panel.
^
Reposition the rear safety belt through the C-pillar upper trim panel.
2. Secure the rear safety belt lower anchor.
^
Install the new bolt and tighten to 31 Nm (23 ft. lbs.).
3. Install the C-pillar lower trim panel.
^
Secure in the clips.
^
Install the 2 screws.
4. NOTE: Make sure the safety belt is operating correctly.
Secure the C-pillar upper trim panel.
5. Secure the rear door aperture weatherstrip.
6. Fold the rear seat fully rearwards.
^
Secure the rear seat backrest catch.
7. Install the parcel shelf.