Range Rover (LM) V8-4.4L (2009)
Tire Pressure Module: Service and Repair
Tire Pressure Monitoring System (TPMS) Module
Service Repair No - 86.54.05
Removal
1. Remove the access panel from the loadspace RH trim panel.
2. Release the auxiliary junction box mounting bracket.
^
Remove the 3 bolts.
3. Remove the tire pressure monitoring module.
^
Disconnect the 2 electrical connectors.
^
Remove the 2 nuts.
Installation
1. Install the tire pressure monitoring module.
^
Tighten the nuts.
^
Connect the electrical connectors.
2. Secure the auxiliary junction box mounting bracket.
^
Tighten the bolts to 6 Nm (4 ft. lbs.).
3. Install the access panel.
4. Using WDS, initiate a new control module.