landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Doors, Hood and Trunk > < Rear Bumper Reinforcement|Service and Repair|Page 7493
Page 1
background image

Cabin Ventilation Duct: Service and Repair

Ventilator(s) - Centre

Service repair No - 80.15.24

Remove

1. Individually release 4 internal clips securing air vent to finisher, apply an even outward pressure until the last clip is released.

2. Disconnect multiplugs and release harness from vent.
3. Release air distribution cable from ratchet assembly and remove vent.

NOTE:  Do not carry out further dismantling if component is removed for access only.

4. Remove hazard warning switch.

Refit

1. Fit hazard warning switch.
2. Position vent to fascia and secure cable.
4. Fit and secure air vent to fascia.

Doors, Hood and Trunk > < Rear Bumper Reinforcement|Service and Repair|Page 7493