landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

A/C - Insufficient Cooling|Page 7658 > < A/C - Insufficient Cooling|Page 7656
Page 42
background image

^

If installed, remove grommet from the affected door (Figure 7 and Figure 8) for access to the door lock adjuster screw.

NOTE:

The door lock adjuster screws rotate counter-clockwise on LH doors, clockwise on RH doors to release tension.

^

Release the door lock adjuster screw two turns.

^

Tighten the door lock adjuster screws to 4 Nm (3 lbf ft).

5.

Install the door lock adjuster screw grommet.

6.

Close front and rear doors.

Disclaimer

Technical Service Bulletin # TEC7612032

Date: 060104

Body - Front/Rear Door Difficult to Open

No: 76/12/03/NAS

Ref:

*Issue: 2*

A/C - Insufficient Cooling|Page 7658 > < A/C - Insufficient Cooling|Page 7656