Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-1700003.png)
7.
Wipe off any excess sealant.
8.
Return the suspension to normal ride height.
REPAIR 3 - BODY SEAMS - REAR
1.
Refer to RAVE section 76.22.74 and remove the rear bumper assembly.
2.
Inspect the following body seams, brackets and grommets for pinholes / gaps:
^
The rear lower panel upper and lower seams behind the rear armature (Figure 4)
^
The rearquarter panel lower seams (Arrowed in Figure 5)
^
The rear bumper mounting brackets (Arrowed in Figure 6)
