Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-471002.png)
2. Fit new crankshaft oil seal to front cover using LRT-12-231.
NOTE: Front crankshaft oil seal should be fitted flush to front timing cover.
3. Remove LRT-12-231.
4. Clean crankshaft pulley hub and mating faces, fit crankshaft pulley hub to crankshaft.
5. Fit new bolt to crankshaft, lock crankshaft using LRT-12-229 and initially tighten crankshaft bolt to 100 Nm (74 ft. lbs.). Using an angle torque
gauge tighten in the following sequence. Stage 1; 60°. Stage 2; 60°. Stage 3; 30°.
6. Remove LRT-12-229 from crankshaft pulley hub.
7. Fit crankshaft pulley.
8. Connect battery earth lead.
