Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-480005.png)
3. Fit CMP sensor, fit bolt and tighten to 10 Nm (7 ft. lbs.).
4. Clean timing gear cover and mating face, clean dowels and dowel holes.
5. Fit new timing gear cover gasket.
6. Fit new chain tensioner 'O' ring and apply sealant, Part No. STC 50550 to areas illustrated.
7. Fit timing cover, fit and hand tighten 6 bolts.
8. Fit LRT-12-225/1 to RH camshaft cover.
9. Fit camshaft cover and tool, fit 4 bolts and tighten to 10 Nm (7 ft. lbs.).
10. Tighten bolts securing timing gear cover to 15 Nm (11 ft. lbs.).
11. Remove 4 bolts securing camshaft cover, remove camshaft cover and LRT-12-225/1.
12. Fit new sealing washer, fit timing chain tensioner and tighten plug securing chain tensioner to 40 Nm (30 ft. lbs.).
13. Clean VCC solenoid, VCC solenoid seal and mating faces.
14. Lubricate inner mating face of VCC solenoid seal.
15. Fit VCC solenoid seal, fit bolts and tighten.
16. Fit 2 new 'O' rings to SAI pipe and position SAI pipe to engine. Fit and tighten 3 bolts securing SAI pipe to engine.
17. Connect 2 coolant hoses to coolant pump and secure with clips.
18. Fit RH camshaft cover.
19. Connect multiplug to VCC solenoid.
20. Connect multiplug to CMP sensor.
21. Secure CMP sensor harness with 3 cable ties.
22. Fit engine harness bracket to engine harness, fit and tighten 2 bolts.
23. Fit fan cowl.
24. Fill cooling system.
25. Connect battery earth lead.
