Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
6. Screw hydraulic ram, LRT-60-033/1 into plate and press drive flange from hub.
NOTE: Outer bearing track will remain on drive flange.
7. Remove plate LRT-60-033/2 and pin LRT-60-033/4.
8. Remove and discard circlip.
9. Fit adapter, LRT-60-033/6 to bearing and using method previously described, remove bearing.
10. Remove pins LRT-60-033/3.
11. Remove bearing track from drive flange using a bearing separator.
Refit
1. Clean hub and drive flange.