Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-397002.png)
6. Screw hydraulic ram, LRT-60-033/1 into plate and press drive flange from hub.
NOTE: Outer bearing track will remain on drive flange.
7. Remove brake disc shield.
8. Remove plate, LRT-60-033/2 and pin LRT-60-033/9.
9. Remove pins, LRT-60-033/7 and LRT-60-033/8.
10. Remove and discard circlip.
11. Position hub to bed of hydraulic press, fit adapter LRT-60-033/6 to bearing and press out bearing.
12. Remove bearing track from drive flange using a bearing separator.
Refit
1. Clean hub and drive flange.
