Correct Oxygen Sensor Harness Routing for Range Rover (LM) V8-4398cc 44L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-764004.png)
^
The two edge clips mounted forward of the 02 sensor must not be used. (Figure 6)
7.
Position the 200 mm mark in the center of the first retaining clip and secure the harness to the clip. (Arrowed in Figure 6)
8.
Position the 230 mm mark in the center of the second retaining clip and secure the harness to the clip. (Arrowed in Figure 7)
9.
Secure the end of the harness closest to the connector into a retaining clip as shown. (Arrowed in Figure 8)
