Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
Control Module: Service and Repair
Electronic automatic transmission (EAT) - ECU
44.14.46
Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed.
Remove
1. Disconnect battery earth lead.
2. Remove 10 Allen screws securing "E" box cover and remove cover.
3. Disconnect 3 blue multiplugs from EAT ECU.
4. Release EAT ECU from mounting bracket and remove from "E" box.
Refit
1. Fit EAT ECU in mounting bracket and connect multiplugs.
2. Fit "E" box cover and tighten Allen screws to ............................................................................................................................. 2 Nm (1.5 ft. lbs.).
3. Connect battery earth lead.
4. Program new ECU using TestBook/T4.