landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Navigation System - Inoperative After Software Change|Page 18 > < Audio Control Relay|Description and Operation
Page 1
background image

Technical Service Bulletin # TEC860505

Date: 050707

Navigation System - Inoperative After Software Change

No: 86/05/05/NAS
FGN LM419
Ref: 86/14/03/NAS
Issue: 1
Date: 07 July 2005

NAV Software and Language Change
Recovery Information

AFFECTED VEHICLE RANGE:

New Range Rover (LM) 
All 2003 and 2004 with NAV

SITUATION:

CORRUPTED SOFTWARE LEADS TO INOPERATIVE NAV SYSTEM

Loading of new software or languages can occasionally stop before completion and a recovery process may be required.

RESOLUTION:

FOLLOW PROCEDURES IN THIS BULLETIN TO AVOID OR RECOVER FROM CORRUPTED SOFTWARE

Follow the procedures in this bulletin if a software update or a language change is required. If at any time during a software update or a language change
the load becomes corrupted, refer to the recovery procedure detailed in this bulletin. A software corruption can occur due to the software CD being
damaged or dirty; or loading is stopped by premature ignition switch-off, voltage drop or time-out due to other vehicle bus activity.

TOOL INFORMATION:

NOTE
Software and language updates must be carried out using software CD LRL0568 3rd Edition or a later issue.

LRL0568 ..................NAV Software CD - 3rd Edition

DDW WARRANTY CLAIMS:

NOTE

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.

INFORMATION ONLY

Normal warranty policy and procedures apply.

Disclaimer

Load NAV Software Following Correct Procedure

NOTE

If this software re-configuration procedure is being carried out after fitting a service replacement Satellite Navigation system YIB500040, the
re-configuration procedure should be carried out before changing the navigation language setting.

Navigation System - Inoperative After Software Change|Page 18 > < Audio Control Relay|Description and Operation