Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position Sensor
Service repair no - 18.30.12
Before disconnecting the battery ensure all text and cautions in the battery disconnection procedure are observed.
Remove
1. Position vehicle on lift.
2. Disconnect battery earth lead.
3. Raise vehicle and disconnect multiplug from CKP sensor.
4. Clean area surrounding CKP sensor.
5. Remove Allen screw and remove CKP sensor.
Refit
1. Clean casing mating face.
2. Observe the following when replacing the transmission, incremental gear or the CKP sensor. If one or more spacers are fitted between
transmission and CKP sensor the distance between the sensor and teeth on the incremental gear must be measured.
3. Rotate crankshaft until a full 'trigger tooth is visible through aperture in casing. Ensure the tooth is centered to the hole.