Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
16. Remove cap from top mounting.
17. Break off locating pin.
18. Loosen nut securing damper upper mounting.
19. Fit LRT-57-045 to damper upper mounting.
20. Loosen remaining nuts securing damper upper mounting.
21. Adjust camber to specified value by turning nut in LRT-57-045.
22. Tighten damper upper mounting nuts to 56 Nm (40 ft. lbs.).
23. Repeat procedure for other side.
24. Adjusting toe:
25. Set steering to straight ahead position and ensure pinion timing marks are aligned.
26. Mark position of steering ball joints for reference.