Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-1180002.png)
1.
Raise the vehicle on lift.
2.
Remove screw securing the rear air spring to the lower suspension arm.
3.
Inspect the rear air spring boss.
4.
If the markings are not visible (Figure 1), install screw securing the air spring to lower arm and tighten the screw to 7 Nm (5 lbf.ft.).
5.
If markings are visible (Arrowed in Figure 2) refer to RAVE section 64.21.01 and replace the rear air spring assembly.
6.
Repeat steps 2 to 5 for the alternate side.
CHECK BATTERY CONDITION
