landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Cross-Member > < Control Arm Bushing|Front|Page 5904
Page 3
background image

2. Remove bush using LRT-64-028/1 with LRT-64-028/2 and LRT-64-028/3 in direction shown.
3. Repeat procedure for other side.

Refit 
1. Ensure bush and bush location in lower arm is clean.

2. Fit bush using LRT-64-028/4 with LRT-64-028/2 and LRT-64-02G/3 in direction shown.
3. Repeat procedure for other side.
4. Fit lower arms.

Cross-Member > < Control Arm Bushing|Front|Page 5904