landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Air Spring > < Campaign - Air Suspension Pressure Relief Valves|Page 6080
Page 3
background image

5.

Follow the on-screen instructions and select "Replace ECU", to reconfigure the air suspension ECU.

6.

Ignore the TestBook/T4 directive to "Replace ECU" and continue to perform the reconfiguration.

7.

Return to the "System Diagnostic" screen and disconnect TestBook/T4 from the vehicle.

8.

Verify proper system operation.

INSTALL CAMPAIGN LABEL

NOTE:

Campaign labels may have multiple Campaign numbers written on them if multiple campaigns are performed at the same time.

1.

When all specified repairs have been accomplished, prepare the campaign label (LRN0002LABEL) as follows:

a)

Place the label on a hard surface.

b)

Use a ballpoint pen to neatly write/scribe in the bare aluminum areas of the label the following information:

^

Campaign code "H293"

^

Your retailer code 

^

The date of repair

2.

Clean all grease and dirt from the radiator support member.

3.

Peel the completed campaign label from the backing paper and position it on the cleaned area.

4.

Roll the label with the special roller tool to ensure proper adhesion.

Air Spring > < Campaign - Air Suspension Pressure Relief Valves|Page 6080