Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-1283011.png)
17.
Select "Reservoir Parameters" from the screen on the right.
NOTE:
The screen shown to the left will then be displayed. This screen gives general information on the Real Time Display selected.
18.
When ready, press the "Continue" button to proceed.
19.
Verify the "Target Reservoir Pressure" displays 10.7 bar and the "Minimum Reservoir Pressure" displays 8.0 bar.
20.
When ready, press the "Continue" button to complete the procedure
21.
Return to the "Diagnostic System" and disconnect TestBook/T4 from the vehicle.
Disclaimer