landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Tire Monitoring System > < Tire Pressure Module|Locations|Page 6372
Page 1
background image

Tire Pressure Monitor Receiver / Transponder: Service and Repair

Electronic Control Unit (ECU) - Tire Pressure Monitoring (TPM)

Service Repair No - 86.54.05

If the ECU is to be replaced then Testbook/T4 must be connected and correct procedures adhered to, prior to battery disconnection.

Remove
1. Remove the Body Control Unit (BCU).

2. Release tire pressure monitoring ECU from holder, disconnect multiplug and remove ECU.

Refit
1. Position ECU, connect multiplug and fit ECU to holder.
2. Fit BCU.
3. Configure new ECU using TestBook/T4.

Tire Monitoring System > < Tire Pressure Module|Locations|Page 6372