Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-1349001.png)
Wheel Bearing: Service and Repair
Rear
Bearings - hub
Remove
1. Remove hub assembly.
2. Remove 4 bolts securing backplate to hub.
3. Fit adapter, LRT-60-033/5 to drive flange.
4. Position plate, LRT-60-033/2, fit pin LRT-60-033/9 to tie bar location and secure to plate.
5. Locate pins LRT-60-033/7 and LRT-60-033/8 to plate and align to brake caliper mounting bolt locations. Fit bolts to secure pins.
NOTE: Pins locate in holes marked 'REAR', with longer pin LRT-60-033/7 aligned with caliper top mounting bolt hole.
