landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

ABOUT US
Thermostat - Fluid Cooler|Page 3864 > < A/T - Shift Concerns/High Engine RPM After 25 Min. Drive|Page 3861

Range Rover (LM) V8-4398cc 4.4L (M62) (2003)

Page 1
background image

Transmission Cooler: Service and Repair
Thermostat - Fluid Cooler

Thermostat - fluid cooler 
44.28.17

Remove 

1. Drain cooling system
2. Release clips and disconnect 3 coolant hoses from the transmission fluid cooler. 

CAUTION:  Always fit plugs to open connections to prevent contamination.

3. Remove Torx screw securing gearbox fluid cooler to cooling pack and remove the gearbox fluid cooler.
4. Remove and discard gearbox fluid cooler "O" rings.

Refit 

1. Clean hose connections.
2. Fit new gearbox fluid cooler "O" rings.
3. Fit gearbox fluid cooler to cooling pack and secure with screw.
4. Connect coolant hoses to gearbox fluid cooler and secure with clips.
5. Fill cooling system.

Thermostat - Fluid Cooler|Page 3864 > < A/T - Shift Concerns/High Engine RPM After 25 Min. Drive|Page 3861