Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-944012.png)
1. Using special tool 205-896, install a new pinion shaft tail bearing cup and apply a press load of 2-5 tons, until the bearing cup is fully installed.
(Figure 23)
CAUTION:
Do not clean or lubricate the new pinion shaft tail bearing, as it is supplied coated with a low friction oil. Failure to follow this instruction will require the
pinion shaft tail bearing to be replaced before the differential can be successfully assembled.
2. Install the new pinion shaft tail bearing. (Figure 24)
CAUTION:
Do not lubricate the pinion seal.
