Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-952003.png)
2. Position anvil, LRT-60-033/10 to bed of hydraulic press and locate hub on anvil.
3. Ensure hub and bearing mating surfaces are clean and dry.
4. Apply stud/bearing fit, STC 50553 to bearing mating surface in hub for half its length.
5. Press bearing into hub using adapter LRT-60-033/12.
6. Fit new circlip.
7. Fit bearing support, LRT-60-033/11 to anvil, and press flange into bearing using adapter LRT-60-033/12.
8. Remove tools.
9. Clean disc shield and mating face, align shield and fit and tighten bolts.
10. Fit hub assembly.
