Range Rover (LM) V8-4398cc 44L (M62) Windshield Moulding/Trim Side Finisher - Windscreen
Windshield Moulding / Trim: Service and Repair
Lower Finisher - Windscreen
76.43.41 Lower Finisher - Windscreen
Remove
1. Remove RH windscreen side finisher.
2. Remove both wiper arms.
3. Using LRT-99-500A remove aluminium boss from both wiper spindles and discard.
4. Remove plastic inserts from both wiper spindles.
5. Release both drain tubes from underside of finisher.
6. Release clips and carefully position finisher away from wiper spindles.
7. Slide lower windscreen finisher away from LH side finisher and remove.
Refit
1. Position lower finisher beneath LH side finisher and secure with clips.
2. Fit both drain tubes to finisher.
3. Position plastic inserts to wiper spindles.
4. Fit new aluminium boss to both wiper spindles.
5. Fit wiper arms.
6. Fit RH windscreen side finisher.