landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Headlamp Wiper Arm > < Side Finisher - Windscreen|Page 9351
Page 1
background image

Headlamp Washer Reservoir: Service and Repair

Reservoir - Combined Windscreen/Headlamp Washer

Service repair No - 84.10.03

Remove

1. Remove LH front wheel arch liner.
2. Position container to catch windscreen washer fluid.

3. Release filler neck from washer bottle and discard seal.
4. Noting fitted position, disconnect multiplugs and hoses from washer pumps.
5. Disconnect multiplug from washer reservoir low level sensor.
6. Release vent pipe from reservoir.
7. Remove 2 bolts securing reservoir to body and release reservoir from front mounting.
8. Remove washer pumps from reservoir and discard seals.

Refit

1. Clean washer pumps and reservoir recesses.
2. Fit new seals to pumps and fit to reservoir.
3. Position reservoir to body, fit bolts and tighten to 3 Nm (2.2 lbf.ft).
4. Connect vent pipe.
5. Connect multiplug to low level sensor.
6. Connect multiplugs and hoses to pumps.
7. Clean filler neck and reservoir recess.
8. Fit new seal to filler neck and connect to reservoir.
9. Refill reservoir.

10. Fit wheel arch liner.

Headlamp Wiper Arm > < Side Finisher - Windscreen|Page 9351