Range Rover (LM) V8-50L SC (2010) Body and Frame Rear Cross-Member Service and Repair
4. Install the transmission support insulator nut, bolt and damper.
-
Lower the transmission.
-
Tighten the bolt to 115 Nm (85 lb.ft).
5. Install the exhaust hanger.
-
Tighten the nut to 45 Nm (33 lb.ft).
6. Install the heat shields.
-
Tighten the nuts.
7. Install the exhaust system. For additional information, refer to Exhaust System
8. Connect the battery ground cable. For additional information, refer to Specifications