Range Rover (LP) V8-4.0L (1999)
Rear Door Latch: Procedures
Latch - rear door
Service repair no - 76.37.13/70
Remove
1. Remove window lift motor/control unit assembly.
2. Release door lock remote control cable from clip on window lift panel.
3. Remove 2 studs securing latch to window lift panel.
4. Disconnect outer cable from abutment bracket.
5. Release remote cable from latch.
6. Release sill button link rod from latch. Remove latch.
Refit
7. Lubricate new latch.
8. Fit latch to sill button link rod.
9. Fit remote control cable to latch.
10. Fit latch to window lift panel, secure with 2 retaining studs.
11. Refit window lift motor/control unit assembly.
Remote Control - Rear Door
Service repair no - 76.37.32
Remove
1. Remove rear door trim casing.
2. Release plastic sheet to clear remote.
3. Remove foam pad from under window lift switch multiplug.
4. Disconnect switch multiplug.