Range Rover (LP) V8-4.0L (1999)
/v8-4.0l/Page-1793014.png)
2.
Remove the grommet from the front doors (Figure 1) and the rear doors (Figure 2) for access to the door lock *adjuster* screw.
CAUTION:
The screw threads are counter-clockwise on LH doors and clockwise on RH doors.
3.
Release the door lock *adjuster* screw on the affected door(s) two turns.
4.
Tighten the door lock *adjuster* screws to 4 Nm (36 lbf.in.).
5.
Install the door lock *adjuster* screw grommets.
6.
Close front and rear doors.
Disclaimer
Technical Service Bulletin # TEC7615032
Date: 040604
Body - Lock/Latch Systems Diagnosis/Repair
No: 76/15/03/NAS
Ref:
