Range Rover (LP) V8-4.0L (1999)
/v8-4.0l/Page-682002.png)
CAUTION:
Retaining screw must not be removed from its location.
9.
Use a long thin screwdriver and rotate screw to release pipe clamp.
10.
Release pipes from heater core.
11.
Remove and discard 0-rings.
INSTALLATION
1.
Clean heater pipes and mating face on heater core.
2.
Install new 0-rings onto pipes. (Figure 1)
3.
Install pipes into heater core openings.
4.
Position pipe clamp, using clamp guides to ensure correct alignment, and tighten the screw.
5.
Remove hose clamp tools.
6.
Top up cooling system.
