Range Rover (LP) V8-4.0L (1999)
REPAIR 4 - Inspection and Repair of Ground Cable Connections
CHASSIS GROUND - REPAIR 4
1.
Refer to Figure 11. Remove and clean the main ground cable eyelets at the chassis post, ensuring they are free from contaminants.
2.
Apply terminal grease (LRNA 201325) to the eyelets and secure.
3.
Tighten ground connection to 8 to 12 Nm (70 to 110 lbf.in.).
ENGINE GROUND - REPAIR 4
1.
Refer to Figure 12. Remove ground cable and clean the main engine ground cable eyelets at the engine block ensuring they are free from
contaminants.
2.
Apply terminal grease (LRNA 201325) to the eyelets and secure.
3.
Tighten ground connection to 8 to 12 Nm (70 to 110 lbf.in.).
MAIN BODY GROUND - REPAIR 4
NOTE:
The main body ground is via the engine ground cable. The mounting location is below the under-hood fuse box.