landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Engine - Tapping/Rattling Noises|Page 2292 > < Fuel Pressure Release|Service and Repair
Page 1
background image

Rocker Arm Assembly: Customer Interest
Engine - Tapping/Rattling Noises

No: 12/02/00/NAS

Ref: WSM Section 12 
Overhaul Manual

Replaces TIB 12/01/98/NAS

Issue: 2

Date: 12/22/00

Rocker Arm Rattle/Tapping Sound

AFFECTED VEHICLE RANGE:
RANGE ROVER (LP)

WA382672 to YA437311

DISCOVERY SERIES II (LT)

Up to YA265404

DISCOVERY (U)

WA753113 to XA795263

SITUATION:
NOISE FROM ENGINE VALVE TRAIN/ROCKER ARMS

Customer complaints of a rattling/tapping noise from the engine found to originate from rocker shaft area may be the result of the hardened push-rod cup
being insecure in the rocker arm.

RESOLUTION:

NOTE: 

This bulletin supersedes and replaces TIB 12/01/981NAS. 

INSPECT AND REPLACE ROCKER ARMS

Investigate customer complaints of valve rattling/tapping noise on vehicles within the above VIN ranges and identify rocker arms with loose push-rod
cups. If noisy or loose rocker arms are encountered during the inspection, replace all rocker arms with updated parts.

PARTS INFORMATION

WARRANTY CLAIMS
Normal warranty policy and procedures apply.

REPAIR PROCEDURE:

DETERMINE FAULTY ROCKER ARMS AND REPLACE

Engine - Tapping/Rattling Noises|Page 2292 > < Fuel Pressure Release|Service and Repair