landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Dashboard / Instrument Panel > < Cooling System - 'Check Coolant Level' Message Displayed
Page 1
background image

Coolant Level Indicator Lamp: Customer Interest
Cooling System - 'Check Coolant Level' Message Displayed

No: 26/02/03/NAS
Ref:
Issue: 1
Date: 09/12/03

False "Check Coolant Level" Message

AFFECTED VEHICLE RANGE:

Range Rover (LM)

All

SITUATION:

"CHECK COOLANT LEVEL" MESSAGE DISPLAYS

The customer may complain that the Check Coolant Level message displays but that the fluid level in the reservoir is at the correct level by visual
inspection.

RESOLUTION:

COOLANT VISCOSITY VERIFICATION REQUIRED

To rectify the apparent inconsistency in the message when the level is visually correct, a careful coolant viscosity check is required. Incorrect viscosity
can lead to incorrect readings and the warning message display. Generally the sensors and expansion tank will not be the cause of the misleading
Instrument Pack message.

TOOL INFORMATION:

RN6024

Texaco AFC AntiFreeze

WARRANTY CLAIMS:

Normal warranty policy and procedures apply. Material allowance is included in labor operation.

REPAIR PROCEDURE

TEST COOLANT SPECIFIC GRAVITY

CAUTION

The low coolant sensing system will not work correctly if the specific gravity of the coolant mixture is incorrect. The specific gravity requirement for
New Range Rover is 1.075,with a 50% anti-freeze solution at 20°C (68°F). This protects to -36°C (-33°F).

NOTE:

Accurate testing equipment must be used to ensure that a precise measurement is made. The test MUST be conducted prior to any investigation, or
the replacement of the expansion tank assembly or the low coolant level sensor.

1.

Verify the specific gravity of the coolant in the expansion tank is 1.075, with a 50% anti-freeze solution at 20 °C (68 °F) for protection to -36°C
(-33° F).

Dashboard / Instrument Panel > < Cooling System - 'Check Coolant Level' Message Displayed