Range Rover (LP) V8-4.0L (1999)
/v8-4.0l/Page-2072002.png)
2.
Open the six access covers in the roof channel moldings. (Figure 1)
3.
Inspect around the roof rack location fittings for pinholes. (Arrowed in Figure 1)
4.
Ensure the fittings are clean and dry.
5.
Fill any holes / gaps with sealant making sure not to fill the roof rack fitting opening.
6.
Wipe off any excess sealant.
7.
Close access covers.
8.
Return the suspension to normal ride height.
REPAIR 2 - BODY SEAMS AROUND THE TOP CORNERS OF THE UPPER TAILGATE OPENING
1.
Fully lower the suspension ride height.
2.
Open the tailgate.
3.
Inspect the full length of the body seams at the upper tailgate opening for pinholes / gaps.
(Arrowed in Figure 2)
4.
Inspect the top corner body seams for pinholes / gaps. (Arrowed in Figure 3)
5.
Ensure that the seams are clean and dry.
6.
Fill any holes / gaps with sealant.
