landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Towing - Flat Towing Behind a Motorhome|Page 2122 > < Wheel Fastener|Specifications|Page 2117
Page 1
background image

Towing Information: Technical Service Bulletins
Towing - Flat Towing Behind a Motorhome

Bulletin: G97-018

Section: GENERAL

Date: 8-22-97

Model:

Applicable to: USA/Cda

Subject:
Flat Towing Guidelines

There is a bit of confusion amongst our associates and customers regarding the proper procedures for flat towing (four wheels on the ground) Land
Rover vehicles i.e. behind a motorhome. Below, please find the approved procedures for each of our models:

Range Rover 4.OSE & 4.6HSE

^

Engage handbrake

^

Automatic transmission gear selector lever in "park"

^

Select transfer box neutral

1.

Remove ignition key

2.

Insert a fuse (5 amps or greater) in fuse position "11" in the right hand seat fuse box

3.

Insert ignition key, turn to position "2" (transfer box will automatically select neutral)

4.

After message centre displays 'TRANSFER NEUTRAL', turn ignition switch to "0" position

^

From "0" position, turn ignition switch to position "1', (switching the ignition key from position "0" to position "1" allows the steering column to
remain unlocked with no electrical accessories engaged to discharge the battery). ^Note: The BECM (Body Electronic Control Module) will not
"sleep" with ignition key in switch. It is suggested on prolonged towing, that the vehicle be started and run for a minimum of 15 minutes every other
day.

^

Release the handbrake only after the vehicle is properly attached to the tow vehicle

^

Refer to owners handbook, Emergency Towing section, for transfer box re-engagement procedure

Range Rover Classic, Discovery Auto, Defender Auto:

^

Engage handbrake

^

Select transfer box neutral

^

Confirm neutral has been selected by safely rolling the vehicle with automatic transmission in park position (do not rely on the neutral warning tone
alone)

^

Ensure that

1.

The centre differential is unlocked.

2.

The automatic transmission gear selector lever is in "park", and

3.

The ignition switch is in the number "1" position (switching the ignition key from position "0" to position "1" allows the steering column to remain
unlocked with no electrical accessories engaged to discharge the battery).

^

Release the handbrake only after the vehicle is properly attached to the tow vehicle.

Discovery 5spd and Defender 5spd

Towing - Flat Towing Behind a Motorhome|Page 2122 > < Wheel Fastener|Specifications|Page 2117