landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

ABOUT US
Tune-up and Engine Performance Checks > < Ignition Switch - Does Not Return To Run Position|Page 3726

Range Rover (LP) V8-4.0L (1999)

Page 1
background image

Knock Sensor: Service and Repair

Service repair no - 18.30.28 - Sensor - LH
Service repair no - 18.30.30 - Sensor - RH

Remove

1. Release fixings and remove battery cover.
2. Disconnect battery earth lead.
3. Raise front of vehicle.

WARNING:  Support on safety stands.

4. Disconnect multiplug from KS.
5. Remove nut securing KS to cylinder block and remove KS.

Refit

6. Clean mating faces of KS and block.
7. Fit KS to block and tighten nut to 22 Nm (17 labor. ft).
8. Connect multiplug to KS.
9. Remove stand(s) and lower vehicle.

10. Connect battery earth lead.
11. Fit and secure battery cover.

Tune-up and Engine Performance Checks > < Ignition Switch - Does Not Return To Run Position|Page 3726