Range Rover (LP) V8-4.0L (1999)
Seat Belt: Service and Repair
Rear Seat Belt - Left Hand
REAR SEAT BELT - LEFT HAND
Service repair no - 76.73.23
Remove
1. Remove parcel shelf support trim.
2. Remove 'D' post lower trim.
3. Remove cover and nut securing seat belt to upper anchorage point.
4. Remove bolt securing seat belt reel.
5. Remove seat belt reel.
6. Remove left hand rear seat.
7. Remove 3 screws securing squab hinge cover. Remove cover.
8. Remove 2 bolts securing squab to cushion assembly.
9. Remove squab from cushion assembly.
10. Remove bolt and wave washer securing stalk to squab hinge.
11. Remove stalk. Collect plain washer.
Refit
12. Fit stalk to squab hinge. Secure with bolt.
Tighten to 35 Nm. (26 lbf.ft)
13. Position seat squab to cushion assembly.
Secure with bolts. Tighten to 45 Nm. (33 lbf.ft)