Range Rover (LP) V8-4.0L (1999)
3. Remove 2 bolts securing squab to cushion assembly.
4. Remove squab from cushion assembly.
5. Remove bolt and wave washer securing stalk to squab hinge. Remove stalk. Collect plain washer.
6. Release beaded edge of cushion cover from seat pan flange. Remove cushion cover/foam assembly.
CAUTION: Take care when releasing cover/foam from belt anchorage finisher.
Rear Seat Belt - Left Hand
REAR SEAT BELT - LEFT HAND
Service repair no - 76.73.23
Remove
1. Remove parcel shelf support trim.
2. Remove 'D' post lower trim.
3. Remove cover and nut securing seat belt to upper anchorage point.
4. Remove bolt securing seat belt reel.