landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

All Other Service Bulletins for Coolant Level Sensor: > < Cooling System - 'Check Coolant Level Message' Displayed
Page 1
background image

Coolant Level Sensor: Customer Interest
Cooling System - 'Check Coolant Level Message' Displayed

No: 26/02/05/NAS
FGN LM303
Ref:
Issue: 1
Date: 17 February 2005

False Coolant Level Warning

AFFECTED VEHICLE RANGE:

New Range Rover (LM)

All

SITUATION:

"CHECK COOLANT LEVEL" WARNING MESSAGE DISPLAYED

The vehicle may display the "Check Coolant Level" warning message even when the coolant level is visually within the correct range in the expansion
tank. Incorrect specific gravity of the coolant mix can result in the "check coolant level" warning message being displayed.

RESOLUTION:

VERIFY COOLANT SPECIFIC GRAVITY

If the customer complains of the above symptom, the specific gravity of the coolant MUST be checked prior to any other investigations or repair, such as
the replacement of the expansion tank assembly or low coolant level sensor. The low coolant sensing system will not work correctly if the specific
gravity of the coolant mixture is incorrect.

The specific gravity of a 50% anti-freeze solution at 20°C (68°F) is 1.075 (using a coolant specific gravity tester) and protects against freezing down to
-36°C (-33° F).

PARTS INFORMATION:

NOTE:

A 50% mix of water and coolant is required for a refill. Topping up with either blue coolant is permitted for recent vehicles with factory fill BASF
G48 coolant (blue). The 50% mix is required to obtain the correct specific gravity.

DDW WARRANTY CLAIMS:

CAUTION

Mixing of the BASF G48 (blue) with Texaco XLC (orange) coolant can result in premature erosion of the cylinder heads or other cooling system
deterioration. Unapproved blending of coolants is to be avoided.

Warranty coverage could be affected by the use of unapproved coolants or the incorrect blending of fluids.

Information Only

Normal warranty policy and procedures apply.
Material allowance is included in labor operation.

All Other Service Bulletins for Coolant Level Sensor: > < Cooling System - 'Check Coolant Level Message' Displayed