Range Rover (LP) V8-4.0L (1999)
/v8-4.0l/Page-1433003.png)
6.
Release the plastic securing tangs from the wheel frame and remove the upper spoke covers. (Figure 3 Insert)
7.
The new spoke covers can be identified by the markings on the rear of the cover.
^
"u.re" - lower right hand spoke
^
"uli" - lower left hand spoke
^
"ore" - upper right hand spoke
^
"o.li" - upper left hand spoke
CAUTION:
the electrical wire on vehicles equipped with heated steering wheels must be carefully and correctly installed.
8.
If equipped, orient heated steering wheel wire to avoid pinching.
9.
Install the lower spoke cover and ensure the securing tangs click into the wheel frame.
10.
Position the upper and lower spoke covers with the guides aligned.
11.
Apply medium pressure and press the upper and lower parts together until they click into position.
12.
Install the back cover onto the wheel frame.
13.
If equipped, connect the electrical connector for the steering wheel heating element. (Arrowed in Figure 1)
14.
Install the four torx retaining screws. (Figure 1)
15.
Refer to GTR section 57.61.01 and install the steering wheel.
