landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Recall - A/T Breather Tube Modification|Page 4913 > < Recall - A/T Breather Hose Repositioning|Page 4908
Page 1
background image

Case: All Technical Service Bulletins
Recall - A/T Breather Tube Modification

No:

D352

Ref:

D321-D324

Issue:

1

Date:

01/12/99

RECALL
Transmission Breather Tube Modification

AFFECTED VEHICLE RANGE:

RANGE ROVER (LP)

SA302295 to WA402293
WA402294 to XA410503

SITUATION:

Water can become captive in the end of the transmission breather tube installed as part of Recall D321-D324 or in late production GEMS vehicles. If the
water freezes, transmission fluid may be forced from the dipstick assembly with the potential for an engine fire.

RESOLUTION:

ALTER THE END OF THE INSTALLED TRANSMISSION BREATHER TUBE

On all vehicles modified or equipped with a transmission breather tube which terminates at either the left or right fender well location, the routing of the
hose must be adjusted and the end trimmed and positioned as per the procedures outlined below.

PARTS INFORMATION:

No Repair Parts Involved

LRN0002LABEL

Campaign label

Qty. 1

WARRANTY CLAIMS:

D352

Time 0.20 hrs.
Position Transmission Breather Tube and Modify End

Material Allowance $0.50 
FAULT CODE: S

Normal warranty policy and procedures apply

REPAIR PROCEDURE:

AUTOMATIC TRANSMISSION BREATHER PIPE MODIFICATION

1.

Open vehicle hood.

Recall - A/T Breather Tube Modification|Page 4913 > < Recall - A/T Breather Hose Repositioning|Page 4908