Range Rover (LP) V8-4.0L (1999)
3.
Referring to Figure 1 and pass cable tie NTC1154 through the tie slot in pipe clip NRC9246.
4.
Pass the tie wrap around axle tube.
5.
Secure cable tie approximately mid way between axle tube breather entry "A" and the air spring mounting plate "B" as shown in Figure 1.
6.
Secure the breather hose into the new clip.
7.
Ensure that the hose is routed clear of the air spring, particularly when suspension ride height "Access" mode is selected.
8.
Verify rear axle lubricant level and top-up as required.