Range Rover (LP) V8-4.6L (2001)
7.
Wipe off any excess sealant.
8.
Return the suspension to normal ride height.
REPAIR 3 - BODY SEAMS - REAR
1.
Refer to RAVE section 76.22.74 and remove the rear bumper assembly.
2.
Inspect the following body seams, brackets and grommets for pinholes / gaps:
^
The rear lower panel upper and lower seams behind the rear armature (Figure 4)
^
The rearquarter panel lower seams (Arrowed in Figure 5)
^
The rear bumper mounting brackets (Arrowed in Figure 6)