Range Rover (LP) V8-4.6L (2001)
Sunroof / Moonroof Motor: Service and Repair
SUNROOF - MOTOR
Service repair no - 76.82.53
Remove
1. Close sunroof panel.
2. Remove front map/courtesy lamp.
3. Remove 3 screws securing sunroof motor to mounting bracket.
4. Remove motor and collect spacers.
5. Remove sunroof motor multiplug from mounting clip and disconnect multiplug.
Refit
6. If position of sunroof motor is not known, synchronize motor to closed position before fitment as follows:
Connect motor to motor multiplug. With ignition in position I or II, operate sunroof switch to open position. Press and hold sunroof switch to
closed position until motor stops.
7. Connect motor multiplug and secure to mounting clip.
8. Fit spacers to motor.
9. Position motor to mounting bracket and secure with screws. Torque tighten screws to 2 Nm (1.5 lbf.ft).
10. Fit front map/courtesy lamp.