Range Rover (LP) V8-4.6L (2001)
/v8-4.6l/Page-462003.png)
12. Remove engine oil filter.
13. Disconnect Lucar from oil pressure switch.
14. Disconnect multiplug from CMP sensor.
15. Remove bolt securing engine oil cooler return pipe to alternator bracket.
16. Loosen unions and disconnect oil cooler feed and return pipes from front cover, remove and discard 'O' rings.
CAUTION: Plug the connections.
17. Remove 9 bolts securing front gear cover and remove cover. Remove and discard gasket.
Refit
18. Clean mating faces of front cover and cylinder block. Clean dowels and dowel holes.
19. Fit new gasket onto dowels in cylinder block.
